B&B anti-sway bars

[stevem]

I am looking to add front and rear sway bars. Does anyone know of a good vendor or donor car? What would be the bar size and width needed? Does anyone have installation pictures? Any help appreciated.

[Clois Harlan]

I had mine made by a company in Oregon and I used a 1" bar. I think if I had it to do again I would go to an adjustable type sway bar that are sold at most of the local speed shops with splined ends. Here is a post I made some time ago when I bought mine:

http://www.clubcobra.com/forums/show...front+sway+bar

[stevem]

Thanks, The old posts have a lot of great info. Do you run a rear bar? Also have you replaced any of the rear trac bars with poly bushings?

[MacGyver]

I too have the same questions. How about the B&B front sway bar? I have heard any fox 5.0 configuration rear bar will work. Can anyone verify this?

[Clois Harlan]

I tried a rear bar but I didn't like the feel so I took it off. I also replace all my bushings in my rear trailing arms with the poly bushings EXCEPT the UPPER control arms that mount to the pumpkin, I kept the butyl rubber ones in there for their ability to flex a little more. Leaving those top ones in seemed to help with handling and ride comfort when not on a track.

Clois

[Dusty Rhodes]

I used a front swaybar from an 86 camaro. works great. picture of it in my photo gallery.