Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   B & B Cobra's --- Speak with Bryan Anderson (http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/)
-   -   clutch cable (http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/81458-clutch-cable.html)

coreyc 08-15-2007 06:46 PM
clutch cable
 
I have a TKO 600 from Fortes which came with what I was told to be the proper clutch cable. I am using the B&B supplied peddle box and the clutch cable seems too short to me. Has anyone run into this problem, anyone have advice or pictures?

lnfletcher 08-16-2007 08:55 AM
I used the stock mustang clutch cable and it works great. I have a few pictures on my site. Let me know if you want closeups.

coreyc 08-16-2007 09:16 AM
Where did you get that clutch hump? That is my problem!

Corey C

pmfranke 08-18-2007 08:30 PM
look at my pics for a clutch mod that realy works well.easy to push and no frayed cables.

OhBuoy 06-22-2008 09:32 AM
Can you give details on your clutch modification? I just had my cable break on me, and am considering hydraulic or a modification.

pmfranke 08-24-2008 04:33 PM
well my modifcation did not work cable snaped clean 4" from the peddle ass.only had 2000 miles on it. can not figure out why.maybe it untwisted the cable causing a weak point ? dont know

wfieldin 08-25-2008 05:37 PM
hydraulic
 
Love my hydraulic conversion, cost under $200.

lnfletcher 08-26-2008 04:57 AM
Wfieldin, were did you get it and can you share any details?
I haven't had any problems with mine, but I don't have the miles on it that most do.

wfieldin 08-26-2008 05:28 AM
Hydraulic conversion
 
Started here, had to modify and add to transmission bracket to work. Used a wildwood master and slave from summit racing. Total cost was around $200.00

http://midnightdsigns.com/Mustang/HYD%20Clutch.htm

lnfletcher 08-27-2008 04:49 AM
Thanks wfieldin, this looks like a new project!

BeasleyRB 08-28-2008 02:15 PM
Clutch - Hydraulic
 
3 Attachment(s)
This works too.

Joemaz 10-04-2008 07:47 AM
Paul Proefrock on his Hurricane Build..has an inexpensive hydraulic setup that works Great.........

http://www.proefrock.net/3x2CSX/Build/clutch.htm


All times are GMT -7. The time now is 03:13 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: