![]() |
BDR Alignment
Got BDR687 aligned the other day and some of the parameters are too far out to fix with the adjustment that’s available. Anyone else have any problems getting their BDR aligned? I'm thinking about getting the castor/camber plates as my front left has slight pos camber and of course no way to adjust them. In the rear the tech couldn't get enough movement in the control arms to get the toe correct either and I don't see an easy fix for that right off. So before I start hacking and grinding I thought I'd post the question and see if anyone had any “work-a-rounds” for these issues.
|
BDR Alignment
I have a problem with the front ( NO ADJUSTMENT) #358 One shop said it was out with no adjustment. I am going to take to another shop to see if it's the same.
I was told it comes from the factory right, the jigs are set to weld everything right, not sure that's true. The castor/camber plates should be free if we can't get them aligned. cHarley |
alignment
xxxxxxxxxx
|
My rear toe brackets were way out of spec from the factory. Even toed out as much as I could go, it was toe'd in way to much. I called Reg, and he had me send him the toe brackets and my alignment specs.
He fixed the brackets and had them sent back to me within a week. No charge. Rear toe was then dead on with adjustability in either direction from requirement. |
Mark, what did he do to the brackets to "fix" them? If its not to complex I'll do it or have it done locally.
Charley, I didn't even know that you had a BDR. Next time I'm down there we'll have to compare notes. pbarker, I'll give you a call saturday. Thanks all, Steve |
Quote:
|
Thought I'd post this for posterity. This is the best my guy could do. How about you guys? I'm waiting on a write-back from Reg now.
http://www.clubcobra.com/photopost/d...gnment_001.jpg |
Send this along with the aforementioned brackets to Reg and he'll take care of it for you...he did for me.
Makes me wonder since so many cars have had this problem, why it hasn't been corrected at the factory already:confused: |
Yes, I ask that myself everytime!!!!
|
| All times are GMT -7. The time now is 06:49 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: