Steering shaft collar

[GLS-BDR226]

In an attempt to fix my steering wheeling binding on my turn signal, I loosened the front collar on the steering shaft to get a little more length on the shaft. But it was a little to much so some of the ball bearings that fit on a rubber collar on the shaft dropped on the floor and I lost some of them. I'm not sure I had all to begin with. Any idea for a source or what this is called? Thanks.

[GLS-BDR226]

I was unable to post this pic in the first post.

[Cashburn]

Should be numbers on it, is a BMW part.

[GLS-BDR226]

Couldn't find any numbers. I'll check some BMW parts sites to see if I can find it. Thanks.

[jay l]

go to a local napa store and have them mike the balls and order them through napa bearing. or any other bearing supplier/maybe fastenal also. they can sell them bulk. grease them up in cage and put it all back together.

[Crashontheone]

Here ya go:
Steering part number:

1995 BMW 325I
32311158835

I purchased them locally from from our BMW dealer for about $25.00 for the pair.

Good luck~

RG