10-06-2013, 06:53 PM
|
 |
CC Member
|
|
|
Join Date: Aug 2012
Location: Houston,
TX
Cobra Make, Engine: Backdraft #1185, VMS 427r
Posts: 87
|
|
Not Ranked
Quote:
Originally Posted by Grey 65
I took your advice as I too have been told, "nice car, tail light is out"... I replaced the two brake light/running light sockets (85860) using your advice. I left the two upper (blinker) sockets alone as they never get hot.
I thank you for your post as it saved me time from having to figure out the best way to fix this problem.
Kevin.....
|
Glad the idea worked for you Kevin. Another tip (and you may have done this), is when you re-install the plastic housing back on the car with the 3 screws that go through the white plastic, the trim and then finally the body, I used a small washer between the screw head and the white plastic such that the lip of each of the 3 washers "pinched" the metal socket housing to really hold everything in place. |
9Likes
Threaded Mode
