|
Turn & Tail Light Groomet
1 Attachment(s)
This is the part Backdraft left off. This finishes the space between the light housing and the body. I have made several and it really adds to the look and seals the light at the base. I am attaching a picture of the light with the grommet installed. if interested contact me. Attachment 26074
|
Bought a set of these and I have to say they made a big difference. There were gaps
between the bottom of the tail lights and the body that spoiled the look. These filled in the gaps that varied in size from light to light. Inexpensive way to correct a manufacturing defect. |
I have had a lot of response to the light housing grommets. If you would reply to my email address: jimbo01@embarqmail.com. I check this mail address daily.
|
I also purchased a set from Jimbo and am very pleased with the fit and finished look the gaskets/grommets give the light housings.
|
Jim what is involved in installing these again?
|
Turn & Tail Light Groomet
Please send any request for installing the grommets to my email. I will be happy to assist you.
|
I got mine on today. Really cleans up the lights. I never noticed how sloppy the gaps were. My only suggestion for improvement might be a even thicker piece of rubber as some gaps are more than others. GREAT IDEA !!! THANKS jimbo01 !!!
This is how I did it... Took about 30'minutes 1. Unplug lights (white connectors) 2. Remove plastic lens (I did this to get at bolt head to remove and install 7mm nuts easier) 3. Remove 3 - 7mm nuts from rear of each each housing 4. Pull out housing and unconnected wire 5. Put rubber grommet on light housing and re-install 6. Tighten 7mm nuts ( use flat head on bolt head to get solid tight fit) 7. Re-install lens 8. Plug in connectors ( I did one at a time to ensure right plugs were connected) 9. Test all lights ASO544 |
Quote:
|
| All times are GMT -7. The time now is 10:46 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: