|
Roush Air Filter Replacement
Since #997 was built in 2008 I figure it might make sense to replace the Air Filter in the Roush Assembly versus cleaning. Anyone successfully locate this part?
I went through the "find filter by size" on the K&N website ... nada. E3515 is the closest. The only option at Iconic is to buy the whole assembly. No filters. |
Closest to what? Post your filters LxWxH here so that people can give you some advice.
|
Has K&N printed on one side and this part # on the other: C147AB - 1
Outside dimensions: 14 1/3 x 7 3/4 x 2 1/2 Inside dimensions: 12 1/2 x 6 x 2 1/2 |
I too have had a devilish time finding any filter taller than 2” in this oval size. 3” would be ideal but I’ll take even 2.5” if available (as a standalone filter only and no housing).
|
If you go the standard cobra oval, the below dimensions and link should help.
Tony Branda Oval 20.8 x 9.5 x 2.25 S&B Oval Air Filter Element (Tall) https://store.cobranda.com/sbovairfielt.html K&N E-1963 20.8 x 9.5 x 3 E-1960 20.8 x 9.5 x 1.8 (Standard) |
Just looking to replace the filter. I have this Roush assembly: https://www.iconicparts.com/roush-ov...eaner-ass.html
|
In this thread FredG said he uses a K&N E-3515, He has the same air cleaner as you do.
http://www.clubcobra.com/forums/all-...ir-filter.html https://www.summitracing.com/parts/k...hoCRzEQAvD_BwE |
Interesting, I looked at this same Filter on Amazon-- different dimensions listed: https://www.amazon.com/3515-High-Per...ps%2C67&sr=8-1
Now that I look on the K&N site, I see the same dimensions as what Summit shows: https://www.knfilters.com/e-3515-oval-air-filter So basically.... Amazon jacked my search. :) Thanks for setting me straight. |
Quote:
|
Update: The 3515 won't work for me. I need the 2 1/2" of filter height. At 2" (3515) the screw does not tighten enough and the assembly is loose. I think a washer might look tacky. :)
|
So the screw is a few threads too long using the 2.0" filter? Can you take 3-4 threads of the screw with a dremel or belt sander?
Or buy a shorter screw? https://www.mcmaster.com/screws/ |
I have the same filter and housing bought new bolt (counter sunk Allen)at Lowes polished it look like chrome sealed with clear coat, anything taller rubs hood
|
| All times are GMT -7. The time now is 07:43 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: