|
Boudy,
I'm interested in the coilovers but isn't a spring change more in line as a proper fix? Do you know what the specs are on the rear springs that were installed on the early BDR's? As I said, I'm interested in the coilovers but am also looking at just replacing the springs with something more suitable than was installed at the factory. Chuck |
Chuck: Sorry, I don't know the old/new spring rates exept that they are about 30lbs apart.
I'll see what I can find out. Boudy |
Email sent to factory in S.A. Now we wait.
Boudy |
Boudy
Could you also find out a cutoff point as far as vin/serial numbers go as well? Thanks Trueoo7 |
YAAAAAAAAAWWWWWNNNNN
|
| All times are GMT -7. The time now is 08:16 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: