Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   Bug Screen for your Backdraft (http://www.clubcobra.com/forums/backdraft-racing/67851-bug-screen-your-backdraft.html)

Blittleton 03-17-2006 04:39 AM
Bug Screen for your Backdraft
 
Thanks for everyone who has ordered a bug screen. I am making up 20 more because the first ten went so fast. I'm working on a oil cooler equiped screen and a oil cooler screen.
http://www.clubcobra.com/photopost/d...m/DSC00889.jpg

Cashburn 03-17-2006 07:17 AM
Pretty good. Are you using black mesh or painting typical screen door material? We get requests for something along these lines but stronger to stop "birds".

Goober 03-17-2006 08:30 AM
Bugscreen for a Backdraft? Sounds like a fair trade.
Just kidding. Lools kool.
Mark

Don 03-17-2006 08:34 AM
Bill:

What are the outer dimensions for both the radiator and oil cooler bug screens ?

Don

Blittleton 03-17-2006 09:33 AM
Jay, we are using the pet screen. with the frame and screen away from the radiator we have approx. 3/4" clearance from the screen to the radiator. It will stop the smaller rocks but nothing will stop a 60mph marble size rock coming in. The screen is pretty impressive, they took a pencil and tried to poke thru it, it stretched but it didn't allow the pencil to completely go thru it. Sold me on it.

Bill

Nor Cal Al 03-17-2006 04:39 PM
Again....What are the dimensions?
Thanks

Secret Squirrel 03-17-2006 05:29 PM
Bill,

How does the screen attach to the radiator? Is the hardware included?

Thanks,

Blittleton 03-17-2006 06:14 PM
Secret Squirrel,
I'm keeping the attachments as simple as possible. They attach to the radiator support and not the radiator. For now I'm using velcro in the corners. It doesn't weigh much so it doesn't need too much support.

Bill

SantaFe66 03-17-2006 08:21 PM
Bug screen
 
I have a Cardiac Cobra and would like one of these screens. I need to know the dimensions of the one you sell to see if it will fit my 4" thick Alum. radiator.

Thanks,

Paul


All times are GMT -7. The time now is 11:55 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: