|
Ford FE Big Block in a Backdraft
I am close to chosing the motor after churning on the SMOG issues for so long. I wanted to find out if anyone out there has a Ford FE BB in a Backdraft. If so, could you share some after the fact information with us and what you learned during the process.
Thanks Dinobyte |
FE in BDR?
I can only comment regarding the BDR with FE since I do not have a BDR. You may want to consider the torque and HP and how it will work with the BMW IRS. You may need to beef it up a bit along with front spring load. Too much of anything HP, Torque, or weight may result in issues...... jeff |
Love it... it is more than up to the task if you need some evidence:
http://www.vintage-motorsports.com/a.../acm.sized.jpg The total weight difference when you have aluminum heads, intake, pump, etc. is what 40lbs??? |
I have a 427 big block in my backdraft #230 and have had no problems to this point approx. 580 H.P.
|
Quote:
What transmission and what is the final rear gear ratio on your set-up? Also, how is the handling? Aluminum intake and heads/overall weight? Thanks Dino |
aluminum intake, pully's, water pump, not block, handles great, go to old post and I have pictures posted in there some where. Look up #230 and you will find it.
|
also have 4 speed top loader tranny and 373 gear ratio, that is ok wish I had 5th gear some times for the long drives.
|
| All times are GMT -7. The time now is 01:47 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: