| spdbrake |
06-09-2016 04:58 PM |
Much like the pic in my earlier post above. I left it barely snug as to not restrict the vibration and torquing movements it gets subjected to but to reinforce only.
|
| Kobura |
06-09-2016 06:26 PM |
I use hose clamps on mine, also. However, I did this after the metal tangs on both mufflers broke from fatigue vibration stress and noticed that the rubber grommets were about to tear loose. I had the metal muffler tangs repaired with reinforcement pieces welded at the mufflers. OK so far after about 5k miles.
|
| jimbo01 |
06-27-2016 12:01 PM |
I talked with AP exhaust products. The AP part #8511 is the same as Backdraft uses. I ordered 4 from summit. They called AP Exhaust Products and had them drop shipped to me as they don't sell retail. They are really cheap. Summit part # 8511 is not correct in their catalog.
|
| jimbo01 |
06-27-2016 12:04 PM |
The AP Products part # 8511 is the same as Backdraft.
|
| jimbo01 |
06-28-2016 12:11 PM |
Exhaust hanger rubber
Quote:
Originally Posted by Cashburn
(Post 747914)
I ordered the hangers based on the make/model you used from rockauto and got something completely different. So be careful on who you order from since there are some varieties to the parts sold for this application.
|
I got 4 of the correct rubber hangers from summitt. They had them drop shipped from AP Exhaust Products. The part # from AP #8511 is the correct number. |
| All times are GMT -7. The time now is 01:36 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
