|
Krikey Seats In A BACC Car ?
Anyone in the Bay Area have a Krikey 41V Series - Vintage Class Bucket Seat, with the Vinyl seat cover in their car?
Looking to go with one in my ERA, and have been advised to try one on for size, so to speak. From what I understand, the seats tend to run a bit large, when ordered per the measurement instructions on the Krikey website. Or ... is there a local source that might have one in stock? I looked on the Krikey website and see that the closest dealer is Summit Racing in Sparks NV. Any suggestions? Thanks! :) - Tim |
Kirkey -- their are a few about , let me see who has one.
|
Thanks Steve!
|
I had one in my 1966 GT350 and now finishing new Cobra had one to put in but ended up selling it as it was too tight for me. The Kirkey seat came with the car I bought and was a 16. They come in 15, 16, 17 and 18 and although the 16 probably would of been ok if I was racing all the time I really needed a 17 for driving on the street. The measurement is across your bottom and was told by Kirkey to sit on the floor with your side facing a wall and put a 2X4 on your other side and measure the distance. My measurement was 17. Cool seat and they really hold you in....
http://kirkeyracing.com/index.php?li...code=Series41V |
FYI..don't know if there is an interest, but I have a Ken Miles alum racing seat that I would consider selling. I had it made from Steve Sunshine (from this forum ) for about $600.
Kramer |
Tim , I have a used Kirkey seat in my showroom for you courtesy of a friend of the ranch, you can stop by any time and try it out( see what you think )
Steve |
Quote:
Kramer, I am not familiar with a Ken Miles seat, how does it differ from a Krikey seat? |
Quote:
Steve, Sounds good ... maybe I can give it a try this weekend ? Thanks! - Tim |
I don't know how to post a pic BUT check out this thread as it has a lot of pictures of the custom seat. These seats where the ones the drives used back in the day with one exception in that the new ones like mine are made of nice aluminum vs the old fiberglass.
http://www.clubcobra.com/forums/all-cobra-talk/75037-ken-miles-alloy-comp-seat-special.html |
| All times are GMT -7. The time now is 12:20 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: