|
"Bridges and Bores" Video
Thanks again everybody for a great season! Make sure to watch in 1080p High Def.
|
Andreas,
That was great. We have to have you do more of these. Thanks, Jerome & JoAnn |
Nice Vid. Which Go Pro did you use and which editing program do you use. thanks tom
|
Andreas
Good job - great video! Chuck |
Andreas
Good job - great video! Chuck |
Andreas
Good job - great video! Chuck |
Thanks for sharing!!!
|
Andreas, I updated your post to embed the video.
|
Andreas - thanks for putting this together. It is a great momento from our day together. Thanks again to all those that attended. We sure are lucky to live in such an idyllic area and have a group like the BACC. Tom
|
Hey guys and gals,
Thanks for the positive feedback and glad that you all liked it. Brent, thanks for embedding. Tom (wanabe5150) - that day i had the gopro hero3 black edition facing forward and the hero 3 silver edition facing back. i used cinneform to extract the clips from the camera and convert to mp4. i then used CS6 Premiere Pro to make the video and export it. then simply uploaded into youtube. On another note, your car sounded so damn good in tahoe! I have a call into my manufacturer to check out my pipes as we had discussed. |
I can't find the large article I did some years back about the undersized headers most Superforance cars from about #2700 back have. Most don't even realize that the headers they have are for a 302 small port stuck on their 402's and 427 small blocks causing a huge bottleneck. Additionally, all Superformance come with two inch mufflers(inside dia) which also chokes them to death. Christ...my Harley has 1.75 in. exhausts for each cyl. For 500 HP you need the newer Superformance 402 headers which actually fit the AFR large port heads and replace the exhaust with 3 inch ID.
Anywhoooo...If you will send me your email I will send you the photos of the two different size headers where the ports don't match and photos of the sectioned Superformance mufflers. From what I understand, a 400 HP motor needs 2.5 inch exhaust......500 HP needs a 3 inch exhaust....and 600 needs 3.5 inch exhaust. email me at wanab5150@comcast.net for the photos. |
| All times are GMT -7. The time now is 07:53 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: