|
Ceramic Coatings
Can some one suggest a reputable place in the Greater San Francisco Bay Area to have headers coated with ceramic heat barrier (thermal barrier coating). I would like to do the headers and sidepipes in black. This may have been addressed previously, if so please accept my apology for asking again.
Thanks Rick |
Rick,
At the last GoodGuys in Nov. I picked up some info on a couple of Ceramic coaters in the area. I will look through my show litrature for some names and more info. I saw sample at the show that looked good but......... who's gonna bring bad samples to a show :LOL: Check back later this week and I'l try to remember to up date this information. Mike "monster" |
Rick, I'm building a 56 chevy truck and I had the manifolds ceramic coated by Accessories Plus. They did a great job. Here's their info.
1421D OLD COUNTY ROAD, BELMONT,CA. ,94002. Phone:650-591-2400. Good Luck. Richard |
Ok,
I found the info that I got at the last GoodGuys so here it is as I said before I haven't dealt with any of these companies only picked up their flyers: Accessories Plus 1421-D Old County Road Belmont 650-591-2400 (It sounds like Richard has used these guys and is happy). West Coast Powder & High Temp Coatings 1090 Shary Circle Concord 925-682-4828 Cap's "Brite Hot Coatings" 4460 S. Chestnut Ave Fresno 559-497-5606 www.capsbhc.com I talked to all about possibly having my side pipes coated silver and polished and one of these companies had a limit as to the length that their polishing tank could handle?? As I said before all of the samples looked great. good luck, Mike "monster" |
| All times are GMT -7. The time now is 03:19 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: