Ceramic Coatings

[Rick Parker]

Can some one suggest a reputable place in the Greater San Francisco Bay Area to have headers coated with ceramic heat barrier (thermal barrier coating). I would like to do the headers and sidepipes in black. This may have been addressed previously, if so please accept my apology for asking again.

Thanks
Rick

[Monster]

Rick,

At the last GoodGuys in Nov. I picked up some info on a couple of Ceramic coaters in the area. I will look through my show litrature for some names and more info. I saw sample at the show that looked good but......... who's gonna bring bad samples to a show Check back later this week and I'l try to remember to up date this information.

Mike "monster"

[richard lucero]

Rick, I'm building a 56 chevy truck and I had the manifolds ceramic coated by Accessories Plus. They did a great job. Here's their info.
1421D OLD COUNTY ROAD, BELMONT,CA. ,94002. Phone:650-591-2400. Good Luck. Richard

[Monster]

Ok,
I found the info that I got at the last GoodGuys so here it is as I said before I haven't dealt with any of these companies only picked up their flyers:

Accessories Plus
1421-D Old County Road Belmont
650-591-2400

(It sounds like Richard has used these guys and is happy).

West Coast Powder & High Temp Coatings
1090 Shary Circle Concord
925-682-4828


Cap's "Brite Hot Coatings"
4460 S. Chestnut Ave Fresno
559-497-5606
www.capsbhc.com


I talked to all about possibly having my side pipes coated silver and polished and one of these companies had a limit as to the length that their polishing tank could handle?? As I said before all of the samples looked great.

good luck,
Mike "monster"