- -
Need a top
(
http://www.clubcobra.com/forums/classic-roadsters-ii/104503-need-top.html)
| mr bruce |
01-08-2011 07:16 AM |
i built a top for a guy up in Michigan, can't locate him, made him an extra piece to glass in to make up for the longer CR doors, i can make you the parts to do it yourself or bring you car to me and i'l do it for you
|
| Double Venom |
01-08-2011 08:11 AM |
Bruce,
I KNOW YOU can. Buddy you've got to get a hold of a CR car! Not going to get rich making tops for CR's but definitely enough to make it worth your while. BIGGY, mounting on the rear? and of course Mounting to the front Windshield?
If you were much closer I would let you use mine for a mold! :(
REMOVABLE side curtains!?
|
| Bill E |
01-08-2011 01:24 PM |
Look in my gallery. the green top is one we made a mould for. The original top that we modified was provided by Mr Bruce this top has gull wing side windows and a hatch back and is lockable. I will be producing soft tops this summer for fore cars I am doing now. If someone is serious for a top I will make some extras 3000 for soft side windows and 4000 for the hard ones. The hard tops start at 6000 you paint it and fit it. this may seen a little extreme to some of you but you must remember we don't build part for outer cars and we are booked with work for the next few years.
|
| 1985 CCX |
01-08-2011 01:31 PM |
|
| Double Venom |
01-08-2011 03:37 PM |
Problem is JEFF they DO NOT make a top for a CR!
Regarding the pressure on the body for the bows of the soft top, they ARE meant to be tight! the body has major reinforcement in the area where the bows fit! NEVER had a complaint on any I built or sold!
|
| fastraxsg |
01-09-2011 08:59 AM |
Hurricane Motorsports has a hardtop that should fit an original body but need to check with them. I have one for my Hurricane...pixs in my gallery. Not fitted on the car other than when it was mocked up before shipping though, I'm moving slow.
www.hurricane-motorsports.com You would need to write or call them. They have made at least two and I think they still have the molds. |
| All times are GMT -7. The time now is 09:07 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
