Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Classic Roadsters II (http://www.clubcobra.com/forums/classic-roadsters-ii/)
-   -   Build Manual - Steering Column (http://www.clubcobra.com/forums/classic-roadsters-ii/106913-build-manual-steering-column.html)

fredd14 09-27-2010 06:05 AM

Build Manual - Steering Column
 
I built a Classic Roadsters Cobra back in 1995. Had a few problems with the ignition switch this summer. Plan is to pull the motor and replace it also going to pull the column and rebuild the ignition switch. Two problems. I cannot find my assembly manual and do not remember what the steering column came out of. It is a GM tilt column. Does anyone have a assembly manual and a list of the recommended parts. I would have used what ever column was recommended.

Thanks
Fred

Double Venom 09-27-2010 06:26 AM

Fred,
Original column called for was a Tilt out of a chevette. Now it is better to contact Flaming River and tell them it is a CR Cobra, pricey but well worth it.

Also you van buy a 65' Ford Ignition switch and parts from California Mustang and put the original style ignition in the dash OR you can just order the column with the switch still in the column.

fredd14 09-28-2010 06:40 AM

Diagrams
 
DV,
Thanks,
I am removing the steering column. May repair or replace it. Also was wondering about the assembly manual as it has the wiring diagrams. If I replace the column, I will move the accessory switch and ignition switch to the dash. Most likely a push button start switch. I can trace out pin connections for the ignition, turn signals etc, but it will be time consuming. Diagram would help. My car is highly modified and could care less about trying to duplicate the original.

Thanks
Fred

Wbulk 09-28-2010 06:54 AM

I have a manual. I will look and see what diagrams it has. Send me an email with your email address so I can scan any pages with the info you need and send them to you.

Ididit also makes a GM column that has the GM electrical connections.

Double Venom 09-28-2010 08:38 AM

Ididit is very good too, just don't now how familiar they are with CR's. I suppose they will also make one to the custom lenght needed?

thatbluetruck 09-29-2010 07:38 PM

Fred;
I agree with elimination of the keys and going to a main switch and an ignition switch with a starter push button. Not only did this confuse the grand theft auto wantabe's in the neighborhood but, I have found this system to be very reliable.


All times are GMT -7. The time now is 12:51 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: