|
Parts I need for completion
1 Attachment(s)
Its been 18 months in the works, but she's just about complete. I need a couple items if anyone can help.
1) Tag light and holder (I bought one from Finshline, but wrong size) 2) What kind of rubber is everyone using on the trunk for a seal 3) Trunk and hood holders (looking for something very nice) Attachment 18323 Thanks, Krewton |
Krewton,
Here is a link for the light recently. http://www.clubcobra.com/forums/classic-roadsters-ii/108799-i-need-part.html DV might be able to chime in on the rest. |
Trunk Seal
Krewton,
I used the "bulb seal" which was supplied by CRII until I realized that the seal did not make adequate contact with the interior surface of the deck to make it watertight. I had a gap, which was greatest across the top and tapering to none down the sides. I replace the CRII bulb seal with a larger bulb seal. I found this to work for me. Mfg. Name: Precision Mfg. Part #: UWS 160-25 (25 designates the length as 25 feet) Supplier: J.C. Whitney Supplier item #: 132561 Cost as of 2009 was $34.99 plus $8.99 S&H I placed one continuous piece up one side, across the top, and down the opposite side. It was too thick for the gap I had across the bottom. I used the seal from CRII, which was adequate. I was able to tuck the bottom seal, which was smaller, into the upper seal and provide for an overlap. Rather than a butt joint. Hope this helps. Twood |
| All times are GMT -7. The time now is 07:34 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: