Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Classic Roadsters II (http://www.clubcobra.com/forums/classic-roadsters-ii/)
-   -   CR Rear shock advise ?? / part numbers ?? (http://www.clubcobra.com/forums/classic-roadsters-ii/119343-cr-rear-shock-advise-part-numbers.html)

Marty l 02-25-2013 01:50 PM

CR Rear shock advise ?? / part numbers ??
 
Looking to replace the rear monroe gas o matic shocks that came with my pile of parts. I am unable to look up the monroe part number as they are very old.

Whats the best all around ride and performance / price rear shocks to go with?

Marty

cobraman428 02-28-2013 08:08 PM

which rear end are you using?

MaSnaka 02-28-2013 09:33 PM

I am using the Pro Shock coil overs. Mods were required. Let me know if you need more info. I do have some pictures in my gallery if that will help you.

John

Double Venom 03-01-2013 06:00 AM

The pro shock coil over set up uses the 8.8 OR you can use the 9" if you want.
DV
PS MaSnaka has a nice set up.

MaSnaka 03-01-2013 05:28 PM

Thanks DV.

John

Marty l 03-03-2013 03:49 PM

Thanks for that info.........I am using the 8.8 diff housing..355 gears.......
On the pro shock thing what spring rate? and what was the shock unit travel length?
I saw that pro shock makes a 3 4 5 6 inch travel unit. ( an recommendations )?
My driving habits are more in the hard touring not full race. Here in CA. our roads are in very poor condition so medium soft mite be best. My front end has Heidt's Super ride coil over Shocks and a manual rack and all works great. A bit loose in the rear though. I get a good workout on roads with a lot of tight corners..... ( Any Info Welcome ) Thanks.......

Marty

MaSnaka 03-03-2013 05:40 PM

Marty,
I would call the tech dept. at Pro Shock. They were very helpful with me when the rear shocks I had purchased through CRII were too long. Find the ride height you want, measure the distance between your shock mounts that you will be using. I think mine was 14" top mount to bottom mount. With 6" of travel you want 3" up and 3" down so when your just sitting the shock plunger is centered in the shock body. They have adjustable rebound S M F. Spring rate is 250. That is from memory so if Im wrong someone please correct me. But the tech should be able to tell you knowing what car you have. Good luck!

John


All times are GMT -7. The time now is 04:15 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: