Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Classic Roadsters II (http://www.clubcobra.com/forums/classic-roadsters-ii/)
-   -   Classic roadsters parts id (http://www.clubcobra.com/forums/classic-roadsters-ii/144704-classic-roadsters-parts-id.html)

440.mustang 04-10-2021 03:07 PM

Classic roadsters parts id
 
1 Attachment(s)
Can I get some help to identify these, 1991 classic roadsters,

sunman 04-11-2021 06:22 AM

It’s the brackets for the flux capacitor. It was a $995 option. The salesman said they were on backorder but I never got one...

sunman 04-11-2021 12:22 PM

I went thru a complete Cobra kit and looked at every page of paper assembly manual and don’t see anything like those. I don’t have a hard top but I don’t think it would need parts like that

fordsrule@msn.com 04-11-2021 12:25 PM

the two small angle iron brackets look like the trunk hinge mounting to fiberglass pieces , as memory serves

sunman 04-11-2021 12:32 PM

No, close but those are cut on an angle and have slots for bolts to hood itself. Now what was it I come out here to the shop to get?

440.mustang 04-11-2021 12:58 PM

Could the 2 angle iron pieces be for bottom of delux dash to transmission tunnel?

440.mustang 04-11-2021 01:00 PM

Trunk hinge has 2 1/4" bolts that attach to back of trunk to hinge,

440.mustang 04-11-2021 01:33 PM

Would the dash to tunnel bracket be the 2 pieces of angle with 2 holes each?

sunman 04-11-2021 02:10 PM

I have the standard dash. I will look in manual get back to you

440.mustang 04-11-2021 02:12 PM

I have the manual, it don't have a picture,

440.mustang 04-11-2021 02:13 PM

I've looked at manual and can't find anywhere that these pieces in picture go,

sunman 04-11-2021 02:18 PM

That’s what I thought

Chicagowil 04-11-2021 02:26 PM

I have the deluxe dash and that is not used on it

The long straps may be used for the gas tank

Thom

sunman 04-11-2021 02:30 PM

Not tank they are thin flexable straps I’m looking at them

440.mustang 04-11-2021 02:58 PM

Car is almost ready to send out to paint, these are parts that I came across that I have not installed, and I've been through the manual a dozen times and seem to miss it, the tags are missing off them,

sunman 04-11-2021 03:22 PM

The width between the frame rails above the axel where you add metal for rollbars and seatbelts is 30 inches. Looks like you could add gussets in corners?? No tag maybe builder made

440.mustang 04-11-2021 04:09 PM

I've looked at manual and can't find anywhere that these pieces in picture go,

440.mustang 04-11-2021 04:11 PM

These parts were in the original kit

sunman 04-11-2021 07:19 PM

Classic signed bankruptcy agreement in Sept 92. They had to fill all back orders before accepting new money. Don’t laugh but my family is from Fargo and my cousin has a friend who worked there. He said pre Sept 92 he would keep parts off of backorder lists by shipping wrong parts. Order compleat Rite. It might be BS but... Were you short any parts in the steel parts boxes?

440.mustang 04-11-2021 08:19 PM

We bought this kit at the time they were going through bankruptcy, 1991, we went to Fargo to pick it up, when we got it they had stuff back ordered, we got several boxes of parts, it has taken me till now to get all the parts together, we purchased a second kit from a guy that was in the same shape, he bought his kit within a month of ours, we got enough parts to complete this one, these are the only parts that I can't figure out where they go, the second kit is missing cowl, where the doors hinge and windshield mounts, and trunk lid, I'll be looking for these when this one goes to paint,


All times are GMT -7. The time now is 02:27 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: