Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Classic Roadsters II (http://www.clubcobra.com/forums/classic-roadsters-ii/)
-   -   Classic Roadsters Cobra Hardtop Moulds (http://www.clubcobra.com/forums/classic-roadsters-ii/144718-classic-roadsters-cobra-hardtop-moulds.html)

sunman 04-14-2021 03:57 PM

Classic Roadsters Cobra Hardtop Moulds
 
http://www.clubcobra.com/photopost/d...6195AF9CC.jpeg http://www.clubcobra.com/photopost/d...10B90C6E4.jpeg http://www.clubcobra.com/photopost/d...51F355890.jpeg http://www.clubcobra.com/photopost/d...0FE36BB3D.jpeg http://www.clubcobra.com/photopost/d...B7B738ADB.jpeg http://www.clubcobra.com/photopost/d...71D9519A2.jpeg Here’s a new photo of the Cobra hardtop moulds.

Edit: Moulds are now on Okla City at WyattCo

74proii 04-14-2021 08:30 PM

RARE HARD TOP 66 COBRA THE CLASSIC 427 BY CLASSIC ROADSTERS - Classic Shelby 1966 for sale

I never can get pics to upload, not even from the urls:(

1ntCobra 04-15-2021 04:36 AM

Quote:

Originally Posted by 74proii (Post 1491797)

http://smclassiccars.com/uploads/pos...oadsters-9.jpg

http://smclassiccars.com/uploads/pos...oadsters-2.jpg

74proii 04-15-2021 07:03 AM

Thanks, One of these days I'll get it right, maybe

Buzz 04-15-2021 07:35 AM

I'll never understand the efforts to make a hard top look like a soft top with molded-in bow lines etc. It's just like the absolutely ridiculous vinyl roof craze in the 70's and 80's - make believe fake convertibles no less!
Blatantly "faux" stuff just doesn't go well with the purely functional aesthetic of a Cobra. Without the fake, angular bow lines and a more rounded profile, it would actually be a nice looking top.

twobjshelbys 04-15-2021 08:46 AM

So when do you go in to volume production?

Alfa02 04-15-2021 09:24 AM

I agree Buzz, never could understand that either. I'd go with a Mr. Bruce LeMans top any day. But then to each his own. Cheers My Friend, TommyRot.

74proii 04-15-2021 02:45 PM

I agree I like the Lemans tons better, and not a fan of the fake bow either. However it is a an option we didn't have, plus it's original to the car, and not half the country away. I doubt it that it shouldn't be too hard for him to modify to make three versions from his original. Original, bow less and Lemans, as he already has the correct dimensions.

sunman 04-18-2021 12:14 PM

Please call Robert Haugen for info on Sebring hard tops or fiberglass. He has been discussing this on the Austin Healey Sebring forums for years and finally made it happen
sebringmoulds@gmail.com
541-900-7620

Edit: update Sebring info

74proii 04-20-2021 11:59 AM

Digging around about "Excalibur" cars, in another post interesting fact from them according to "Ohekk" here on CC. "Two were sold with the hard top option, and my "Last One" makes three." Wounder if that is where these moulds are from, or Classic?

sunman 04-20-2021 12:13 PM

These came from Ryan in Canada. They are the real moulds that came from Classic Roadsters. The top on the blue Cobra in photo was made in this mould. You can see on the letter I scribbled $3500 for 2 that’s what price was when I called in 1991.

Edit: moulds in Okla City now

74proii 04-20-2021 02:56 PM

Just a thought...things move around.

eaks 04-29-2021 04:30 PM

Ill give him a shout when I return from my work trip but does anyone have any ballpark pricing on these?

sunman 04-29-2021 07:49 PM

Im reasonably sure these fit Excalibur’s too. This is the real deal Classic Roadster top mould

eaks 04-30-2021 08:04 AM

Awesome. I guess this is who Ryan was referring to when I talked to him. Still waiting on a reply from him about some possible softtop options and i assume Roberts number (which I now have thanks to you).

I will give him a call when I get back (most likley will be over the weekend but will leave a message with him). Hopefully I can confirm costs and get one of these ordered. $1500 was right about at the maximum I would want to be at as I will be shipping internationally (unless you want to pick it up and haul it up for me as you mentioned you were road tripping around)?

Ill give him a shout tho. Thanks for getting the details and providing them to the community.

sunman 04-30-2021 09:07 AM

Edit: Moulds in Okla City at WyattCo

eaks 04-30-2021 11:41 AM

Sounds good. I will chat with him and see about his availability and shipping costs. Does anyone have a manual for the installation of the hardtop?

eaks 05-08-2021 08:05 PM

Thanks sunman.. I have been in touch with Robert. I have gone ahead and told him I will take one (not sure when he will get around to making it).. Also trying to figure out how I am going to get it but depends a lot on the boarder situation..

Does anyone have a manual or additional pictures showing the installation of the hardtop? Any additional items required? I'm assuming there is some install manual for the few hardtop ordered from Cr.. Robert doesn't have any of this info and hasn't seen a Cr in thr flesh to know exactly what is required..

Thanks

Roylerumble 05-16-2021 07:28 AM

very interested too. I'd definitely be trying to rework the fiberglass to remove the bow lines though. I'd be willing to do a US run once the boarder opens up to bring a few back to Canada for anyone interested as well.

eaks 05-16-2021 02:43 PM

Quote:

Originally Posted by Roylerumble (Post 1492936)
very interested too. I'd definitely be trying to rework the fiberglass to remove the bow lines though. I'd be willing to do a US run once the boarder opens up to bring a few back to Canada for anyone interested as well.


You should reach out to Robert and let him know your intent I told him as soon as he is able to that I would take one right away (he seems to be quite busy right now). I said i would either drive down or arrange transport.. If required (due to boarder situation) figure out shipping..

If you reach out maybe we can figure out a few for us Canucks and see what we can do. Where abouts are you located?


All times are GMT -7. The time now is 04:22 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: