|
Missing part, classic roadsters 1991 kit
1 Attachment(s)
New kit from 1991 missing this part for hinges and windshield mount, anyone have a spare or blue prints I can build one from
|
The windshield mounts basically the same for all cobra. Classic Roadsters just show where to cut. I have never seen them separate from the windshield. I would ask companies like Finishline or Shell Valley. As far as I know all cobras other than Superformance use the same windshield. Did you look at your styrofoam box the windshield came it? I could give a pic of the car side of the door mounts, I do not have the door side mounts.
|
This piece is missing the complete unit, this is a pic of the the piece I need, or if I can get good measurements I can build it, I can make the hinge mounts off the hinges, but would need a measurement from the 1x1 tube to center of hinge bolt holes, also the holes for windshield mount holes and Angel of windsheild posts also flat piece for dash mount, wiper mounts, width of arc on top
|
I just picked up my 91 kit, and another guy is building the exact same one. All parts are easy to get to. I'll do up some good pics and measurements for you. PM me with an email
|
I’m not clear if Royals got one loose or not. I’ve got one not installed. If you want I can trace whole unit laid on its side and mail pattern to you. That would make figuring the radius easy. Make a bending buck and 3/4 plywood weld up jig off the pattern. PM me if interested. Party On
|
did you get what you need?
|
Hey Royal I got one I’m measuring and taking photos of. I figured the hoop radius but will trace the whole thing too. I also have photos of coil overs and brakes you are looking for. Will post tomorrow and update your threads
|
nice. I'm going to start tearing into my project soon here and removing the body from the frame. I figured I could take the firewall off and start doing the same if needed.
I'm looking forward to the pics of the pedals and coil overs. Pm'd ya my email. I also went to the site of the original manufacturer of the upper control arm mounts and found some cobra parts there. They have a wiper kit, looks to be the best price I've seen so far. |
Who is the supplier for the wiper motor?
Thom |
Bethania Garage doesn’t sell Cobra parts or Mustang II alignment saver brackets anymore
They bought from Finishline and Shell Valley I’m shopping the “Period Correct” Lucas setup linked to in wiper thread A arm brackets from Terry’s alignment saver 2 drawing in his gallery look good |
Quote:
|
Quote:
|
Got a fab shop about to happen
I will make the single hole a arm brackets, that’s whats in photos All the cool guys use the Quad Shocks so Im making brackets for them first. Only needed with rubber rear arm bushings Changed my mind on the old SVO brakes and will be ordering a complete SN95 rear brake kit from North Racecars Hey this is a new build finally:D Party On Wyatt |
Sunman, Remember if you go with the Cobra brakes they are larger than the GT, and you should order the anti-moan brackets from SVE to stop the vibration. The SVE are the best I have seen. I assume you have the 8.8, as there are kits for the 9" as well.
|
The North Racecars brakes come complete with everything, e brake cables and 3 braided brake lines
The brackets are proprietary and patented. Easy new done deal I’m on to making frame brackets for the KYB Quad Shocks I just picked up The brackets are already on the 8.8 I like softer bushings and don’t plan to use adjustable hard bushing arms so I want the shocks Life’s good Party On Wyatt |
We might not be on the same page. I have never seen a "complete kit" come with these from anybody but original Ford. I wasn't talking about the mount brackets. I was referring to these:
tps://lmr.com/item/LRS-2366K/mustang-cobra-sve-anti-moan-brackets-79-04?utm_source=google-shopping&utm_medium=comparison-shopping&utm_campaign=google-shopping-v2&adpos=&scid=scplpLRS-2366K&sc_intid=LRS-2366K&gclid=EAIaIQobChMI2Jbu1NSz8QIVqgytBh2Ing7cEAQYASAB EgJLovD_BwE |
It’s a complete kit North Racecars with special patented brackets that don’t need extra bracket
Don’t need no triangulation Thick as a brick Rotors, loaded calipers, e brake cables, braided brake lines, axels if you want It’s sweet. Goggle it up, North Racecars I’m waiting on UPS with the springs and shock mount brackets now Just mocked up the quad shock and designed a bolt on frame bracket for the shock Party On Wyatt |
Firewall Hoop
1 Attachment(s)
Hello. I am in the middle of starting my build on a 92 CR I just picked up. I can get you what you need. Pm or email me. Jeff
|
Quote:
|
Welcome to the best forum on the web!
Looks like small block, T5 and you got most of the chassis done There are 5 or 6 CRs going at once now This hasn’t happened in a while What Royal said, start a build thread, post pix and make sure they are in the gallery Links and post photos disappear with time You guys were great when my crew set off false alarms in hospital remodels... Party On Wyatt |
| All times are GMT -7. The time now is 06:10 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: