| Roylerumble |
07-11-2021 03:16 PM |
who relocated their fuel cap?
One of the things I want to do is relocate the fuel cap to the fender and recess it. Is there a fiberglass kit or pocket I can buy to do it or am I going to have to fabricate it up? Does anyone know the dimensions and measurements of it and where to place it on the fender?
|
| MaSnaka |
07-11-2021 05:33 PM |
Kevin,
DV aka Double Venom had a fiberglass mold made for that. I haven't seen him post in quite awhile so I don't know where he is at. You might find some of the info you need if you look him up. He was never shy about posting his phone number so you could try and reach out to him if it still works.
John
|
| sunman |
07-11-2021 05:49 PM |
There are photos of it in DVs gallery
The buck and mould too
I read back then somewhere he said he used like a wax can for a plug
|
| 74proii |
07-12-2021 02:48 PM |
Yeah I dug that out of some deep diving. I asked him a long time ago about acquiring one. He never got back to me. I had heard he was no so active anymore. The biggest thing I noted was the locating notch.
|
| 3040csx |
07-13-2021 05:48 PM |
I did mine
I bought the inset from DAX cobra they’re located in Belgium the part was so cheap but the shipping was double the cost of the part to the US I thought it was well worth it under $125 total . Have them invoice you and pay with pay pal
so you can illuminate any extra currency charges it might be cheaper than 125
|
| Roylerumble |
07-29-2021 08:43 AM |
Quote:
Originally Posted by 3040csx
(Post 1494827)
I bought the inset from DAX cobra they’re located in Belgium the part was so cheap but the shipping was double the cost of the part to the US I thought it was well worth it under $125 total . Have them invoice you and pay with pay pal
so you can illuminate any extra currency charges it might be cheaper than 125
|
I emailed them and it is a very reasonable price. thanks for the tip |
| All times are GMT -7. The time now is 04:22 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
