Club Cobra GasN Exhaust  

Go Back   Club Cobra > Manufacturers, Engine Builders, tools, and parts. > Classic Roadsters II

MMG Superformance
Nevada Classics
Main Menu
Module Jump:
Nevada Classics
Nevada Classics
Advertise at CC
Banner Ad Rates
MMG Superformance
MMG Superformance
MMG Superformance
March 2024
S M T W T F S
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31            
  #1 (permalink)  
Old 01-13-2003, 06:00 PM
CC Member
Visit my Photo Gallery

 
Join Date: Nov 2002
Location: Central Iowa,
Posts: 17
Not Ranked     
Cool Fan connections for CR with computer control

I thought I should asked before I go and design a relay system. I have the following wires for my fan. Wiring harness 152 151 157 and ground. The fan has two wires + and -. Plus I have two wires from the computer. One turns on a fan at 180 deg and the second wire will turn on a fan at 220 deg. These wires will be connected to relays. I am only using one large fan from summit racing. So I will only need to use one of the fan wires.

I would like to be able to have the computer regulate the fan plus be able to override the computer with the switch on the dash.

I was thinking of using the computer to control the fan as if it were an air conditioning switch. But which wire would that be. Or am I missing something at the end of the front main harness.

Thanks
Doug
Reply With Quote
  #2 (permalink)  
Old 01-13-2003, 06:10 PM
dscott's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: May 2000
Location: Sauk Centre, MN
Cobra Make, Engine: Owner, Classic Roadsters II
Posts: 1,347
Not Ranked     
Default

Doug, I'm not sure about the computer hookup. What type of signal does the wire send? Ground or hot. You would also need to know what the turnoff temp would be. On at 180, off at ?.

To hookup the fan through a relay you can buy a standard horn relay and follow the connections as described. All universal relays use the same numbering system.

# 87 to Battery + or circuit breaker on firewall.
# 86 to temp sender on engine (fan sender)
# 85 to wire 151 from Classic harness
# 30 to fan +
Ground the other wire to the fan to the chassis.

To use an over ride switch attach wire 157 from the Classic harness to # 86 on the relay. The fan over ride switch on the dash has wire 157 and 161. Remove wire 161 and attach a ground wire to that terminal.

The temp sender is supplying the ground for the relay. When it gets to the stated temp it grounds itself. That's why you run wire 157 to the same terminal on the relay and supply a ground at the switch. When you flip the switch on you supply a ground to the relay which turns the fan on.
Don
Reply With Quote
  #3 (permalink)  
Old 01-13-2003, 07:11 PM
Double Venom's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Nov 1999
Location: Pentwater, Mi
Cobra Make, Engine: Professional Cobra & Streetrod Builder
Posts: 5,352
Send a message via AIM to Double Venom
Not Ranked     
Default

Darn Don,,,,

You're good!
DV
Reply With Quote
  #4 (permalink)  
Old 01-13-2003, 07:56 PM
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Jul 2002
Cobra Make, Engine:
Posts: 15,712
Not Ranked     
Default wiring

Ha ha,,,,,Hey DV, you got the Double Venom all re-wired and back on the road,,,,,,or is Don going to have come down there?

Whew, that baby got some wires on it!

Ernie
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: CC Policy
Links monetized by VigLink