|
Thanks for the pictures tcrist. Ed I don't want to go to hyd. unit just trying
to find solution. I don't have a "barrel" after seeing picture maybe I can fab up something that will work, tcrist in the pictures Are those headers and side pipes CR's or did you get them somewhere else I need a set and with CR problems right now I am scrambling to find some that will work or that I can use to fab a set off of Thanks George |
Gas40,
The headers and sidepipes are from CR LTD before Don bought the company. They are on my Cobra right now and are actually kind of quiet. Although the Cobra is still in the garage and I have not drivin it yet on the road. I still need to finalize the interior and install the doors and windshield. Attached is a video of me pulling it off of the trailer and into the garage. YouTube - Cobra fireup Terry |
Gas40,
If you don't have a tube that bolts onto the firewall and the clutch sleeve/nylon beaing fits into then a simple 1/2" (?) tube works great. Shower curtain rod, towel rack rod, etc will work great. 4-/2" long to 5-1/4" weld a plate on one end allowing enough room for the cable to go through without hitting the tube, drill a hole on each end to put bolts through and you have it. If you really want to make it easy weld two 1/4x20 studs on the flange and simply drill a hole in the firewall for the cable and one 5/16's hole on each side and then bolt it on that way. Clear as mud? Take a look at a picture of one and it all becomes quite clear. DV |
Gas40,
Look at my pictures. On page 2 these is a picture "clutch pedal area". That along with the "clutch cable firewall" shows it pretty well on how it goes together. I have not modified my "tube" yet. When I take it out I will make a print of the tube assy and post it in my pictures. I will let you know when I do that. Terry |
Thanks guys! I think that I can figure it out now and fab something to work
|
| All times are GMT -7. The time now is 04:55 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: