![]() |
What a deal...Needs fininshing but not a donor..
Everything is new. I bought this car and have realized that I do not have the time to finish it. My loss and it is a big one is your gain.. Almost everything on this car is NEW not from a doner car.
351W with aluminum heads, Perfomer Intake, 750 Holley, MSD Iginition, MSD billit Distributor, KSR Billit Power steering setup, Complete tubular A rm with QA1 Coil overs front end with race car adjusting uppers, Griffen radiator and electric fan, King Cobra Clutch, HTOB, New Tremec 5 spd, 9" rear with QA1 Coil overs and 3 point setup, 16 gallon Jazz fuel cell, Holley red pump, Ron Francis Wiring Harness,SW gauges complete, 2 sets of doors "1 solid mount 1 hinged" , New windshield in box,New side headers in box and on and on. 4 wheel disk brakes with wilwood pedals and on and on... Way to much to list. I need to sell and need to sell soon that is why I am only asking SOLD! Goto www.watersracing.com and look at the 67 Cobra. You get everything for the car that I have. Email me as I check email about every hour... This nis not a kit car but a car that has a true race car suspension. http://www.watersracing.com/home%20001.jpg |
Just as an FYI, would help to know who's kit is is.
Sincerely, Bill S. |
Factory Five
On one of the boxes in his garage it says" To: Factory Five"
So, maybe it is a FFR kit???? |
Probably a Spec racer???
|
Guys, that is not an FFR, Unique, ERA, Contemporary, EM, Kirkham, or SAI to the best of my knowledge...........
Bill S. |
Not a Shell Valley either...
|
Looks like a West Coast.....maybe.
|
Quote:
http://www.clubcobra.com/forums/show...threadid=47955 ..you said you knew the car. Looks like a custom frame with an FFR body / body parts.. ..whatever it is, we shouldn't harass Steve unless there is a genuine interest in buying the project. |
As I stated it is not a kit car......Also I need to ad that the Car is Titled as a 1967 Ford Cobra 2s.
|
It looks to me like a heck of a good start on a track car.
RD |
The car, yes, but who's kit it is, no.
Bill S. Quote:
|
Body??
The chassis may be custom, but do you know who made the Cobra body? I am asking because I am interested in.
|
Interesting vent
1 Attachment(s)
The body has an interesting vent in the upper rear fender next to the gas cap. Does anyone recognize this?
|
That is not a vent, it is where the 4 point roll bar goes through the body. As people have told me before it looks like an LAE body. I don't know, but I do know it is solid and not cracked and is a nice car. On my website you can see the extra parts that comes with it.....If you want pictures of anything on this car email me... I will be glad to take some for you.
Oh yea when I say it has new stuff on it...It is all new! The tires still have all the tits on them..... |
If anyone would like to talk about the car please call me at 706-323-3850. I will be up until 10 pm EST tonight...Or cell tomorrow at 706-527-0459.
|
Just listed it on ffcobra also..
|
UPDATED 12-28-03
Here is what is left to do on this car:
4 wheel alignment Have the ps hoses made up "3 of these" Mount Fuel pump "Race hose and billit filter already done" Install the Wire Harness: This thing looks easy as everything is in bags labeled. It is a Ron Francis kit. Install the body " Have to weld on the mount brackets to the chassis. This has to be done after the alignment so the body can be centered on the wheels. Install the doors. Either solid mount race ones or hinged ones..I have both sets new! Install the dash and gauges Install the side headers Bleed brakes and clutch Have a muffler shop install j tubes from the manifiolds to the headers Go Play There is not much left to do but there is enough to say I done it. Like in the pictures I haveverything to complete it except the ps hoses. Brand New windshield inthe box, brand new side headers in the box, all new gauges Stewart Warner in boxes, new doors race and street version, I have a cracked windshield I use for mock up, I have the wind breakers for the side of the windshield, sunvisors, gas cap assy, trunk latch kit, tag light bracket, New headlamps, turn signals, I also have the rear 4 round lights if you want them in the car instead of the small rectangular ones in there now and on and on. A ton of parts. Again everything is brand new on this car and it is TITLED as a 1967 Ford Cobra model 2s. Not as a kit car. I would also be willing to take an ATV and $7500 cash for the car. |
WEST COAST?
SORRY ST, THAT AINT NO WEST COAST..BUT IT DOES LOOK LIKE A HELL OF A DEAL!....:3DSMILE:
|
Updated price in first post...
|
It looks like this must be the previous owner.
http://www.clubcobra.com/photopost/s...1&ppuser=17556 |
| All times are GMT -7. The time now is 01:18 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: