Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Consumer Watch (http://www.clubcobra.com/forums/consumer-watch/)
-   -   Classic Motor Car Cobra Replicas (http://www.clubcobra.com/forums/consumer-watch/51674-classic-motor-car-cobra-replicas.html)

grayfoxrunpa 03-16-2004 09:18 AM

Classic Motor Car Cobra Replicas
 
Request information on Classic Motor Car Replicas. I know some history of company, now Street Beasts, but were the Classic kits okay when completed.

notdoneyet 03-16-2004 11:55 AM

I have one of their kits. Have had it for 3 years now and it is still uncompleted. It is not a very easy kit to build, and you might as well throw ot the manual. Have had to do much fabrication. The frame and the body seem to be of very good construction. Thick fiberglass and nice gelcoat finish. Other members on this forum have completed cars and seem to like their cars. They do have a bad rap, but its seems mostly to be from their business practices and not the quality of the vehicle itself.

mike knight 03-16-2004 12:29 PM

I BOUGHT ONE OF THE STREETBEAST KITS ABOUT THREE YEARS AGO AND ITS FINISHED EXCEPT PAINT. THE FRAME IS WELL PUT TOGETHER AND THE GLASS WORK IS VERY GOOD. I AGREE THAT THE OWNERS BUILD MANUAL IS A LITTLE WEAK. YOU HAVE TO HAVE ABOVE AVERAGE MECHANICAL APTITUDE AND SOME HELP FROM PEOPLE IN THE CAR INDUSTRY TO HELP. I DIDN'T USE ANY DONOR PARTS SO THAT ALL COMPONENTS WERE ORDERED AS "BUILD TO FIT". EXAMPLE I TOOK THE CHASSIS TO S & S CHASSIS IN DES PLAINES ILL. TO HAVE THE REAR END BUILT TO FIT. THE REAR END IS TRIANGULATED FOUR LINK WITH A WISHBONE, ANTI ROLL, LOCKER AND STRANGE 41 SPLINE AXLES. IT WAS MORE EXPENSIVE TO DO IT THIS WAY BUT THE END RESULT WAS THE CHASSIS IS NOW INFINITELY ADJUSTABLE AND THE REAR END IS ALMOST BULLET PROOF. I CAN'T COMMENT ON THE INSTALLATION OF DONOR PARTS BUT I CAN SAY THAT THE CHASSIS GUY SAID THAT THE FRAME WAS WELL CONSTRUCTED. THE BODY INSTALL WAS A LITTLE TEDIOUS BUT I DON'T KNOW IF IT IS ANY DIFFERENT WITH SIMILARLY PRICED KITS. IF YOU HAVE THE TIME, SPACE AND PATIENCE YOULL BE O.K. I HAD NEVER BUILT A CAR BEFORE BUT BUILT TWO AIRPLANE KITS (SONERAI II AND GLASSAIR FG) SO I WAS FAMILIAR WITH FIBERGLASS CONSTRUCTION METHODS. SORRY TO BE SO LONG WINDED HOPE IT HELPS.


All times are GMT -7. The time now is 08:53 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: