|
Dan
Great job with picture documentation. What are you up to? Your tank looks very similar to Dave's. I plan to add a drop trunk S/C style this winter so the tank will need to be like yours but using an angle from back to front. That way the rear inside panel can be removed for working on the diffy. |
Guys,
My tank looks similar but has more angles on the frontside up to the top. This one looks like it has a lid on the top, probably to house a bladder like mine. Dan, do you know what the capacity is? Hey Dan, don't mean to be criticle, but from the pics your jack stands look dangerously close to the edge of the frame. Just don't want it to come down on ya! Ditto Jeff.... what are you doing? |
Dave, the tank capacity is 22 gal. and it does contain a self sealing bladder. There is also a hatch in the bottom of the trunk that allows access to the rear brakes from the top.
The photo of the jackstands is deceiving. They are actually centered quite well. With any luck, they'll be out of there tomorrow anyway.. Thanks for the concern. |
Dan;
Great pics on your setup! A couple of questions: a) I noticed the Koni Coilovers on your setup. Do you by chance have the part numberrs available for these coilovers? I have my original SPAX that I'd like to change. b) I like your tank having a self sealing bladder for safety reasons. Who fabricated the tank that included the bladder? George |
THe Koni's are 80T1491 but I don't have a name on the tank. It was built by a shop in California for the previous owner and I've found out the hard way that he is no longer there. Sorry.
|
Hmmmmf! I think they need a skin in the tank cos their welds aren't leakproof. My calculations give 23.75 gallons going by Daves dimensions. Dans and Daves tanks are different in that Daves has a cutaway front edge to access some of the rear end hardware presumably. Dans has a separate lid we see wrapping the edge and I assume Daves has a panel on top to install the bladder. The one I'm making off Daves dimensions is almost done. I'll post some pics shortly.
|
| All times are GMT -7. The time now is 07:00 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: