|
EFI Sensor Output
Dave,
I am researching my cobra engine EFI/Control system and have narrowed it down to either the TEC or FAST units. Both units provide the option for full sequential control (vs. bank-to-bank) using sensor inputs such as throttle position, MAP, inlet air temp, coolant temp, knock sensor and gear selection. Question - does the top loader have a sensor out put for gear selection that the EFI control unit can use as additional input for adjusting the fuel/air mixture real time? What about the TREMEC or TKO? Thnaks, Bill |
A toploader will not have any sensor output on it. A Tremec may have a high gear sensor output only.
|
Hmmm,,,if all thats required is a top gear switch it seems like there should be a way to rig one up (or even use some kind of manual switch for the input).
Ernie |
bv911 BILL Why would you want a input or out sensor on the trans unless you are ploting a 1/4 mile run. You can make one and mount it on the u-joint if the drive shaft. There was a tech piece in one of the hot rod or car crafts about doing this for a MSD tach. It will plot shift points. I have a Speed-Pro seq system. I think it's a great system I had a weak ground and blown a shunt in the ECU, sent it back and they replaced it for free. They will update your ECU if you want more bells and whistles. These systems have a real time for running with the O2 sensor. I would tell you to buy the wide range O2 system. It is more flexable. I have a wiring printout for the system. Rick Lake
|
| All times are GMT -7. The time now is 02:44 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: