| strictlypersonl |
10-18-2016 07:00 PM |
We've never used those PBR calipers, so I can't be sure that we can adapt them to the smaller disk until I get one in my hands.
|
| 66gtk |
10-18-2016 07:45 PM |
|
| strictlypersonl |
10-19-2016 03:44 AM |
It looks like the caliper will have to be rotated down also, and maybe some extra clearancing of the upright. There's no way to tell whether it will actually work without having all the parts in my hands. You could do some of it by removing the current bracket, installing the smaller rotor, and trying to fit the caliper on the assembly.
|
| 66gtk |
10-19-2016 08:40 AM |
Quote:
Originally Posted by strictlypersonl
(Post 1406571)
It looks like the caliper will have to be rotated down also, and maybe some extra clearancing of the upright. There's no way to tell whether it will actually work without having all the parts in my hands. You could do some of it by removing the current bracket, installing the smaller rotor, and trying to fit the caliper on the assembly.
|
Yea, that was my plan. I'll have to cross my fingers. I suppose a bracket of some kind can be fabricated if I can get it all to fit in the mock up stage. Tin foil and cardboard can go a long way, right (: I kind of like the COBRA lettered calipers and they look a little more "vintage" than the modern Wilwood style. It would be nice to be able to keep them in use.
Thanks for the continued support. If these calipers don't work out, do I understand that you indeed have a bracket that would accommodate the Wilwoods I specified? If so, what would be the cost for such a thing?
Troy |
| strictlypersonl |
10-19-2016 09:30 AM |
The brackets will probably be around $200. Since we haven't made them in several years, they're basically one-offs. Maybe we still have some kicking around, if you're lucky.
|
| ERA2076 |
11-02-2016 09:06 PM |
I did not read all of this, but I have a full setup off of 2076. Spindles, Brackets, Wilwood big brakes. Just bolt it on.
PM if interested.
x-chr
|
| strictlypersonl |
11-30-2016 07:41 AM |
Made some of the old-design brackets.
PM sent.
|
| 66gtk |
12-07-2016 03:32 PM |
Thanks Bob. I received the brackets yesterday. They even came complete with new hardware. First class stuff as usual!
|
| strictlypersonl |
12-08-2016 06:41 AM |
Quote:
Originally Posted by 66gtk
(Post 1410726)
Thanks Bob. I received the brackets yesterday. They even came complete with new hardware. First class stuff as usual!
|
Without those low-head fasteners, you'd find that the rotors wouldn't fit. We just try to make sure that those problems don't surprise you at the last second. |
| All times are GMT -7. The time now is 03:49 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
