Steering linkage

[Dave Cordrey]

I'm buiding an Everett Morrison and am looking for the steering linkage from the steering columb to the Steering rack. Any help where I could find this please let me know.

[Jack21]

Borgeson, and Flaming River make steering column shafting and couplers to connect steering column to rack.

[rbray]

Dave,
What front suspension do you have on your EM? I have the their custom tubular. If you have the same I can give you the part numbers for the shaft and joints.

Roger

[Dave Cordrey]

Roger,
I have the same EM custom front end as you so if you can give me the parts nummbers I would greatly appreciate it, and where you got them from. I am also trying to put in a manual clutch rather than the hydrolic clutch. Do you have any info on that

Thaks Dave

[rbray]

Dave,
These linkage parts are for the custom tubular front end, power steering rack and the I-did-it column.

The parts are all made by Borgeson.



Univeral at the rack pn 03-0 Splined at both ends

Shaft pn D6 22" inches. splined at both ends

universal at the col. pn 37-0 splined at one end. Double D at
the other end.

I bought my parts directly from EM, so I don't know where to tell you to look. However Borgeson does have a website.
http://www.borgeson.com/ Try contacting them and see if they can help you out finding a place to buy the parts.

Hope this helps

Can't help with the clutch .. I went hydrolic
__________________

[Dave Cordrey]

Roger how many miles have you got on your cobra. Have you ha d to work on your clutch yet. I've come up with a way to set up the manual clutch. What kind of wing mirrors did you set up. If you did the bullet type are they functional
Thanks Dave C

[Dave Cordrey]

Roger also thanks for the contact with borgeson.

[Jack21]

Borgeson sells direct, and will dance you through the parts selection process.

[Dave Cordrey]

Thanks Jack they took care of all my needs.