Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ERA---Speak with Bob Putnam (http://www.clubcobra.com/forums/era-speak-bob-putnam/)
-   -   FIA Lug Nuts (http://www.clubcobra.com/forums/era-speak-bob-putnam/40519-fia-lug-nuts.html)

NeedAntiVenom 04-13-2003 09:39 AM
FIA Lug Nuts
 
Bob,

Peter called and said he's ready for those round rubbery things. I have the wheels (PSE 8x17 and 9.5x17 bolt ons), and Michelin Pilot sports (245/40ZR17,275/40ZR17) but need lug nuts. I presume the seats are 60 degree, 7/16 front 1/2 rear - but what depth of lug nut do I need clear the stud length?

TIA,

Jim

NeedAntiVenom 04-14-2003 12:51 PM
DOH! (partially)
 
DOH!

The seats are flat not conical, but I still need the length of the studs from the surface of the rotors to get the correct depth so the nut does not bottom out on the studs. Any suggestions on suppliers?

TIA

Bob Putnam 04-15-2003 11:28 AM
The front stud is 7/8" long, the rear is 1" long.

Sorry I took so long. :rolleyes:

Tongue Pirate 04-15-2003 03:57 PM
2086......, 2087......, :) 2088:)!!!!! Gettin' Close!!!! Please!!!

NeedAntiVenom 04-16-2003 06:49 AM
Bob,
Thanks for the reply - hopefully you were out banging your head on wet rocks. ;)

TP,
Going up there in the next couple of weeks. If 2088 is around I'll take some photos for you.

Jim

Tongue Pirate 04-16-2003 08:20 AM
That would be most excellent! From what Peter said last week the frame was in the jig & would be going to the powdercoaters after that. He said about a month ago that the body was there. I call Peter at least every couple weeks to check in.

NeedAntiVenom 04-16-2003 10:19 AM
TP,

Only every couple of weeks? - I'm impressed by your reserve! He doesn't SEEM to mind when I call him every other day. ;) %/

Jim

Tongue Pirate 04-16-2003 10:21 AM
I would call him every day but it takes so much out of me just trying to get through to him!**) :LOL:


All times are GMT -7. The time now is 08:04 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: