11-28-2003, 08:59 AM
|
|
CC Member
|
|
|
Join Date: Jan 2003
Location: Federal way ,Wa,
Posts: 85
|
|
Not Ranked
switch bezel tool update
Thanks to all who helped on my first thread. After reading them i had a couple of crown royals and headed for the garage and heres what i came up with. First i got a craftsman 1/4 drive 9/16 deep socket (The 9/16 is the same diameter as the bezel and deep to clear the switch) Then with a sharpie pen i marked were the prongs go . Then off to the bench grinder for a couple of minutes and some final touch up with a flat file.This along with a backing card for protection worked great and all for $3.00 (less the crown) Hope this helps someone....
|
Threaded Mode
