
07-26-2004, 12:07 PM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: Dec 2001
Location: Shasta Lake,
CA
Cobra Make, Engine:
Posts: 26,617
|
|
Not Ranked
Joea,
If you have yours connected the way the schematic posted shows, it should work. Note that there is a fuse shown in the lead going to the red wire. If you can get to where you connected your red wire to the #40 white wire and disconnect it easy, put a meter on the white wire and turn on your key and see if you have any voltage there. You should have 12V or close to that.
Ron
|