My ERA visit

[RAO-3]

Originally Posted by Rickd

Tony painted my FIA and both he and Peter recommended the spray on Clear Coat on the rear fenders to protect against rock dings. I went with it. It cost all of $100, is a clear (has a slightly opaque tint to it) finish, is barely detectable, and works. So far with 1500 miles, not a ding - and the fender has been hit by small road debris. Rick

Thanks Rick, I'm adding that to my list of questions for the painter!

Ray

[patrickt]

Originally Posted by RAO-3

Thanks Rick, I'm adding that to my list of questions for the painter!

Here's a picture of the rear fender protection. You have to look hard to see the line that tells you where it starts. It's a little easier to see in real life, but this will give you an idea.

[RAO-3]

Originally Posted by patrickt

Here's a picture of the rear fender protection. You have to look hard to see the line that tells you where it starts. It's a little easier to see in real life, but this will give you an idea.

Is that the clear film from 3M?

Ray

[patrickt]

Originally Posted by RAO-3

Is that the clear film from 3M?

Ray

Yes, it was applied by the folks at ERA, not CCC. But I believe you can have it done either way. I'm told it takes some skill, though -- it's not like putting a sticker on the windshield.