| mr0077 |
03-15-2009 09:40 AM |
Quote:
Originally Posted by CobERA
(Post 929984)
I put a sandwich thermostat on mine also. My temps run about the same as Ken's, but my car runs much better than his!:D
|
Rick, you must be smoking those funny cigarettes again...unless you got another motor!:LOL: Let's see now, what were those dyno results? I've got them around here somewhere...
Seriously, how's the car and the Houston gang? Hope you, Dorothy and the family are doing well. Have fun at San Marcos! |
| WarrenG |
03-16-2009 11:06 AM |
I just placed a piece of cardboard in front of the oil cooler. Most people don't notice it because they don't look down that far. It increased my oil temps approx 40 degrees ( 21F OAT, oil went from 150 to 190, 40F OAT, oil went from 160 to 200-210). Was about 220 the other day when it was in the 60's.
|
| Cobra 29 |
03-16-2009 08:50 PM |
Moss Motors sells an MGB Oil Cover that fits 10 row coolers
Moss Motors sells a black plastic cover that covers one side of a 10 row oil cooler that has side arms that wrap around the sides of the cooler. These arms flex open to "snap" around the cooler. The cover also has some form on the inside to protect the cooler surface and prevent the cover from being loose.
|
| PANAVIA |
03-18-2009 03:40 PM |
If you have an OSH hardware store - go ask for "1/8" rubber diaphram in the sheet.
-- get yourself a 1'x'1 slice and that way you can make 2 of them. (one for you one for a freind, to or to messup on)
-- dont forget to take a manila folder with you and a pentel sharpie so you can make a pattern and then cut the rubber to match.
my oil on cold nights stays at 80-90C in a small block ford. (326CI)
|
| All times are GMT -7. The time now is 07:16 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
