Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   mickey thompson cross ram ? (http://www.clubcobra.com/forums/fe-talk/109395-mickey-thompson-cross-ram.html)

L.B. 02-28-2011 05:55 PM
mickey thompson cross ram ?
 
Hi I am new to the forum and am lookin for a distributer extention for a fe mickey thompson croos ram.. just bought one not knowing about this part....HELP thanks corby

767Jockey 02-28-2011 06:30 PM
Corby,
Have you tried the FE forum? I know one of the guys on there at one time was talking about remanufacturing the distributor extention for the M/T cross ram. Good luck.
Doug


http://www.network54.com/Forum/74182/

SoTxButler 02-28-2011 06:32 PM
Doug,

Not trying to hijack this thread, but how are you doing? Hope things are going well.

Russ

FWB 02-28-2011 07:22 PM
Quote:
Originally Posted by L.B. (Post 1112794)
Hi I am new to the forum and am lookin for a distributer extention for a fe mickey thompson croos ram.. just bought one not knowing about this part....HELP thanks corby
it's more of a offset.....the distributor needs to be modified, and there is a plug thats sits down into the motor acting as a bushing. the piece that is the unobtainium is the offset housing which has a shaft with a cam gear to drive your oil pump and the offset gear to drive the distributor. i have a drawing of the dizzy mods i'll post for you.

tcrist 02-28-2011 07:31 PM
There is a manifold and adapter on fleabay.

Dumpling 03-06-2011 07:39 AM
It's not an offset.

It's basically two distributors cut up and lengthened.

Bring two FE distributors to a good machinist, along with the manifold, and he should be able to fix you up.

Ditto on posting this question on the fordfe.com forum.

Problem with the extra long distributor shaft is you get sloppy at higher rpm's.

Maybe a DIS system?

767Jockey 03-06-2011 09:17 AM
Quote:
Originally Posted by SoTxButler (Post 1112801)
Doug,

Not trying to hijack this thread, but how are you doing? Hope things are going well.

Russ
Just now starting the long road to recovery, Russ. They seem to have had their fill of poisoning me and radiating me, :o now I have to try to get back to normal, if I can ever remember what that is! Thanks for asking!:)

Barry_R 03-11-2011 06:11 AM
Good machine shop. As noted - those are "makable" parts.


All times are GMT -7. The time now is 10:00 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: