-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| Danr55 |
04-27-2011 06:17 PM |
FE Hydraulic Roller Cam
I've found lots of solid lifter roller cams but not hydraulic lifter rollers for an FE motor. Anyone out there have a suggestion?
|
| blykins |
04-27-2011 06:42 PM |
Readily available through Bullet, Comp, or others.
Comp would be the quickest, I could have one on your doorstep in about 3-4 days.
|
| lovehamr |
04-27-2011 06:58 PM |
Keith always has his custom grinds on the shelf as well.
|
| RestoCreations |
04-27-2011 07:35 PM |
I went with one of Keithcrafts custom hydraulic roller cams. They can set you up with the correct pushrods and lifters as well. I have PBR lifters, which keith craft does not use, so i had to measure for pushrods and order my own.
|
| Danr55 |
04-27-2011 07:56 PM |
THanks Guys.. I've looked through the Comp on line catalogue and haven't been able to find one. Do you have an item number so I can get some idea of the grind?
|
| Chaplin |
04-27-2011 09:47 PM |
They are easy to find. I got a custom ground hyd roller from Crane in about a week. They shelf grinds are ready to ship.
|
| blykins |
04-28-2011 02:49 AM |
Quote:
Originally Posted by Danr55
(Post 1125513)
THanks Guys.. I've looked through the Comp on line catalogue and haven't been able to find one. Do you have an item number so I can get some idea of the grind?
|
Dan,
They are not listed in the Comp catalog specifically for FE's...
If you know kinda what you want, you can look through Comp's lobe catalog and pick out the lobes. I would use either the Xtreme Energy lobes or the XFI lobes. Both seem to work really well. |
| lovehamr |
04-28-2011 05:20 AM |
Dan, just call 870-246-7460. You're not going to find a whole lot of info on line just because FE stuff is a drop in the bucket compared to other engine types.
|
| Danr55 |
04-28-2011 05:59 AM |
Thanks everyone. I've got lots of information now. Just another example of how well this forum works.
|
| All times are GMT -7. The time now is 03:02 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
