FE Hydraulic Roller Cam

[Danr55]

I've found lots of solid lifter roller cams but not hydraulic lifter rollers for an FE motor. Anyone out there have a suggestion?

[blykins]

Readily available through Bullet, Comp, or others.

Comp would be the quickest, I could have one on your doorstep in about 3-4 days.

[lovehamr]

Keith always has his custom grinds on the shelf as well.

[RestoCreations]

I went with one of Keithcrafts custom hydraulic roller cams. They can set you up with the correct pushrods and lifters as well. I have PBR lifters, which keith craft does not use, so i had to measure for pushrods and order my own.

[Danr55]

THanks Guys.. I've looked through the Comp on line catalogue and haven't been able to find one. Do you have an item number so I can get some idea of the grind?

[Chaplin]

They are easy to find. I got a custom ground hyd roller from Crane in about a week. They shelf grinds are ready to ship.

[blykins]

Originally Posted by Danr55

THanks Guys.. I've looked through the Comp on line catalogue and haven't been able to find one. Do you have an item number so I can get some idea of the grind?

Dan,

They are not listed in the Comp catalog specifically for FE's...

If you know kinda what you want, you can look through Comp's lobe catalog and pick out the lobes. I would use either the Xtreme Energy lobes or the XFI lobes. Both seem to work really well.

[lovehamr]

Dan, just call 870-246-7460. You're not going to find a whole lot of info on line just because FE stuff is a drop in the bucket compared to other engine types.

[Danr55]

Thanks everyone. I've got lots of information now. Just another example of how well this forum works.