Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   Which FE Starter ? (http://www.clubcobra.com/forums/fe-talk/1240-fe-starter.html)

Black Snake 06-07-2000 11:50 AM

HI , I just wanted to know what starter everyone has and what they think of it ? price ? where you bought it ? I have a 428 and was looking at a high torque mini style ? Thanks Scott

Carleton 06-07-2000 03:22 PM

Hi Scott
Check out the Hitachi pro racing starters.
2.0kw Their around $250.00 . I have one on
my FE427 and it's working great. Any hi-performance shop should be able to get you
one.

Carleton

Monster 06-07-2000 05:15 PM

I also have a Hitachi gear reduction starter. Seems to work great.The nose has multiple holes so you can rotate the starter body so that the cables can avoid headers. My cars not quite on the road yet, but I have been doing a lot of garage miles and it turns over fine everytime. BTW: I got my starter from a local Bay Area rebuilder "Autoletrics" for about $150 (1 year warranty and they stand behind their work)I also got my 85amp chrome alternator from them for $75)both about a year ago so prices may have changed some.

monster

Dennis Mosley 06-10-2000 08:07 AM

I use the Mcleod #810160 ran about $200. I like it alot. Beats the stock style starter I had on the motor at first.

RICK LAKE 09-04-2001 05:28 PM

hi SCOTT I HAVE ERA 428, 427, WITH A 428CRANK IN IT IT HAS A TILTON STARTER IN IT I PAIDED 219.00 2 YEARS AGO CVR SELLS STARTER IN JEGS AND SUMMIT FOR 196.99 IT IS A NIPPONDENSO MOTOR WITH A 3:1 FOR 4:1 GEAR RATIO IT HAS 5 TO 18 ADJUSTMENTS TO SET THE CORRECT AIR GAP BETWEEN THE DRIVE AND THE FLYWHEEL THESE TWO PARTS STORES WILL GIVE YOU THE BEST PRICES MOST OF THE TIME. GIVE THEM A CALL AND ASK ? GOOD LUCK RICK LAKE RDCOBRA428@AOL.COM :) POWER IS YOUR FRIEND BUT TORQUE IS WHAT MAKES YOU MOVE.

Red Era 09-04-2001 09:06 PM

Rick

Are you using the Shelby Aluminum Block? It was recommended to me to use the powermaster starter. But it does not fit the shelby block without modifying it for clearance. Did the Tilton starter fit out of the box? Thanks for any advice?

Tim


All times are GMT -7. The time now is 09:58 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: