|
Webber Carbs ???
I am in the market for a Webber setup for my 427? What advise can anyone give and what to watch out for? Does anyone know who might have a complete set of sale? I appreciate your input
Thanks Dan |
SOrry posted on wrong message
|
Dan-
I know of two websites that offer Weber setups: One is Finish Line, and the other is Inglese Induction: http://www.cobraaccessories.com/ http://inglese.com/index.html Hope this helps Venom_S :3DSMILE: |
Dan...didn't you just buy a set from e-bay? What happened? as posted earlier Ingleese is the only people I know of. hope this helps.
Gary |
Webbers
Hey Gary I posted this before I bought the set on ebay. I am in the process of rebuilding them. I have gotten a lot of help from Enzo at Finish Line as well as the people at Pierce Manifolds. I was lucky in that the Webers had most of the correct internal parts that I would have needed to set them up for a 427. I just got the stacks back today from the company that chromed them. The person that I bought them from said that he pulled them off of an orginal cobra about 10 years ago. They are really turning out nice. I can't wait until I put them on my new engine and start tuning process. I use the Desk Top Dyno program and by adding webers alone to the engine that I am building, it increased the torque about 55-60 ftlbs. It has been a good winter project.
Dan |
What is the going price for a 427 48IDA setup..Manifold,carbs and linkage?
Thanks GW |
Hi Dan. Webers are very nice carbs,but they need alot on work to make them run well. 48mm carbs are limited to the rpm of the engineand size talk to enzo about the total flow per cylinder. They go flat on a fe 484 motor at about 6700 rpm. If you saw Dave Salkowski cobra in Kit Car 2 or 3 issues ago he is running a rare set of 58mm carbs and red lines at 7200 rpm. He spent over 50 hours on the dyno to sent his system up. You have to remember that 1 carb works one cylinder for all the flow. If you like fuel injection take a look at TWM inductions at their system. Their throttle bodys go to 52-54 mm, and I love my Fuel injection system on my car once it was set up. Good luck Rick Lake
|
| All times are GMT -7. The time now is 07:45 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: