|
New Stage 2 Edelbrock Flow Numbers
We have improved our already popular Stage 2 FE heads with new port designs. We have improved the exhaust quit a bit as it has always been as little on the weak side. This is a street/strip head with a user friendly 45 degree valve job and a conservative 200cc runner volume on the intake.
We can do a 50 degree valve job for the high lift race stuff and get more flow plus we still have our Stage 3 head which I am fluffing up some as well. The new flow numbers are as follows. Intake .300/227, .400/276, .500/307, .600/325, .700/336 and .800/344. These are very similar to our regular Stage 2 head but our new port works better .600 and above. The exhaust is .300/161, .400/195, .500/226, .600/249, .700/265 and .800/276. The exhaust now flows close to our Stage 3 head but is a little smaller. Remember our Stage 2 heads use a 2.19 and 1.75 valve so they can be used on bores as small as 4.140 so they work great on 428 strokers. We also do as version with the smaller 2.09/1.66 valve and they flow about 10 percent less. Thanks, Keith Craft |
what is the price on those heads seems like they flow a ton. Just bought a set of felony heads from barry for my 482
|
We sell these heads for 2599.00 complete with hydraulic roller or flat tappet springs. Please feel free to give us a call at 870-246-7460.
Thanks, Keith |
heads
thank you that is a good price for the numbers that you have in your post thanks its pretty cool that we have you barry and brent helping us all out with a wealth of information. And you guys sell most of the same stuff but by talking to you guys and reading the posts all of you guys seem like old school down to earth guys
|
How does the stage 2 head compare to the bare felony head, how much more is the felony head with the same port job, its cool to see new option for the FE, is it best to have Keith or Barry do the head work or do most builders order bare heads and do the head work themselves or with their own machinist???
|
Keith,
Do you do your stage 2 work on customer supplied E brock heads? How much? Does the stage 2 work include intake port matching? Do you think it is needed on a street engine? John |
| All times are GMT -7. The time now is 10:56 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: