used FE billet dist

ERA 626 · #1 (**permalink**) 06-25-2019, 09:40 PM

I am in need of a used MSD pro billet MSD distributor to build a cam cync sensor. I will tear it apart and make a cam sync sensor out of it. No need for the cap or electronics. Its for an FE. PLEASE HELP!!!

Dumpling · #2 (**permalink**) 06-26-2019, 05:29 AM

FAST XDi Race Cam Sync Distributors Provide Accurate Signal - CPG Nation

ERA 626 · #3 (**permalink**) 06-26-2019, 09:33 AM

we dont need the electronics only the shaft. and also when you click on the one for the FE the link does not work... My build will not use a traditional distributor, we only need the housing so we can drive the oil pump and install a cam sync sensor. It has to be as low as possible to clear the cross ram runner, no higher than 2" MSD makes one for a SBF but not an FE

redmt · #4 (**permalink**) 06-28-2019, 07:39 AM

PM sent



FE Forums sponsored by Keith Craft Inc.