|
stush, whats the rest of your setup?
|
mine hasnt gone to the dyno yet but it ran low 10s in my 33 coupe ill be dynoing it soon im estemating arond 700 hp when im done i hope
|
Blown, whats your setup. Thats fast!
|
I had mine rebuilt by Dyno Time.I wanted to go nuts but Greg the owner knew I was going to drive this car as much as could on the street. He left it pretty much stock.So here are my dyno numbers.
4000 rpm-338hp 4000 rpm-430 trq Seems a little meek compared to you guys,so watch out you dodge neons ! |
Wad,
394 hp at 4000 should equal 517 lbft. at the same rpm, shouldn't it? rick, instead of loosening the vlaves I used to turn the engine over from time to time to relax the springs. by hand. but in any case I set valves in spring time. dom |
Dominik I live in N.J. We get snow and cold weather 5 months out of the year. If you take the 6 bolts off the valve cover and loosen the 4 nuts or bolts on the rocker shaft assemblys you do not have to crank the engine over with no oil pressure or oil to fully coat the bearings and this way you are not doing any damage to the motor. Just a thought. Rick Lake
|
| All times are GMT -7. The time now is 09:58 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: