-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| computerworks |
08-23-2003 12:15 PM |
hey rem... don't fret over the "why's"... that's not very productive.
|
Rem
There's a place in your part of the country called Southern Automotive. Look around the site here and you will find a link. Talk to them about how much you have and what you want from your motor.
|
| BANDIT 1 |
08-23-2003 01:06 PM |
Mr. REM:
I apologize for the situation earlier on this thread. It was never my intention to do anything but give some help.
BANDIT
|
| FFR428 |
08-23-2003 02:06 PM |
REM, sorry the link did not work. If you look to your left and scroll down to the "CC advertisers" you'll see the link for southern automotive. Click on it...:3DSMILE: G.
|
FFR428
But, by golly, those were some badassed starters!:3DSMILE:
|
| southernfriedcj |
08-23-2003 03:17 PM |
Quote:
Originally posted by mrmustang
Funny thing is, I've read the book **) **) **) **) (hey, if you can't laugh at yourself sometimes)........
Bill S.
|
Bill, I somehow missed the couple of posts on page 1 of this thread between you and Bandit. It was not my intention to pile on or to try to rub salt in any wounds that may have occured.
That being said, Mike's post was cold, and I did like it;) , but I wasn't trying to start any cr*p.
Yours in increased sensitivity,
sfcj |
| Keithc8 |
08-31-2003 10:39 PM |
Engine Pricing
We can build you a very nice FE engine using a new Genesis block which we do have and a Scat cast steel crank. We are building these in the 482 to 489 cubic inch range. We use Edelbrock heads stage 2 with a Edelbrock performer rpm or Victor JR. We install hydralic rollers and they work great. These engines will make at least 600Hp and 575ft.lbs. tourqe on pump gas and idle at 800 rpm,s. we can do this engine complete from inyake to carb of the dyno. We are also doing the Shelby all alm. crate engines at 17,500.00. Thanks, Keith Craft
|
| All times are GMT -7. The time now is 01:56 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
