|
stainless/ chrome bolts 427
Does anybody know the sizes of the bolts for a 427 & toploader transmission. I am looking to use 12 point bolts. Or does any offer a kit for these misc. items. I already purchased the ARP engine kit but that did not cover everything.
Bell housing to Block Top loader transmission to Lakewood Bell housing top loader access plate at the top etc. |
Priobe,
Measure the thread depth, type and bolt size. Call ARP and order the closest lengths. If you are running aluminum heads, do the same for the header bolts. The bolts they call "header bolts" are usually 3/4" length. When you add the header flange, gasket and any locking device thickness, that length is a joke. I have found 1" length bolts work in my friend's 392 right off the shelf. I plan on ordering the same lengh for my FE. They will be trimmed if needed. Steve http://www.clubcobra.com/photopost/d...021809-med.JPG Nice engine detail. I really like the redundancy of the two fan belts |
May I suggest Fastnal?
You can order out grade 8 or hard SS. Just a thought. |
Thanks for the info will try to look them up
Do you have their number |
Since ARP is in my backyard, I was able to get the bolts to do what you want.
Several of the bolts are not in the catalog but they have them. I used SS 12pt bolts and have the Part #'s and a contact. My app is a FE block to Lakewood to Toploader. I bought five packs but you can also buy quanity one. Send me a PM if this is what you want. Gary |
Thanks Steve,
I wanted to make sure if something ever happen, at least the motor would not over heat |
www.totallystainless.com. They have bolt kits for FEs, and just about every other type of motor.
|
| All times are GMT -7. The time now is 04:17 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: