Stock appearing push in breathers for PentRoofs

[DuckRyder]

Anyone have a source for original looking push in breathers for chrome pentroofs with holes.

The Mustang joints are not that clear about which are "Push in" vs "Push on".

I don't want writing on them like edelbrock or Mr Gasket or some such. I'd like one that looks like this:



The only valve covers that I have that will clear the rocker shaft studs are these pent roofs.

I wanted to use more stock appearing factory "Pent" covers.

[SFfiredog]

Summit Racing sells a nice, clean looking, no-name push-in breather.
part # SUM-G3400
It can be yours for the bank-breaking price if $5.50 each.
www.summitracing.com

--Mike

[Rick Parker]

That design is available from CJ Pony Parts, or Branda. There is a decal that is/was usually put on the center, indicating oil change frequency.

Rick


Rick

[DuckRyder]

Guess I'll have to go with the Summit one, that doesn't look too bad.

[GEORGE ANDERSON]

This is the style I think you might be talking about...
George

[SFfiredog]

push-in... push-in, Georgie, not twisty, twisty

How ya doing Mr Hastings?

--Mike

[GEORGE ANDERSON]

Mike...the decals would work!
George

[DuckRyder]

Originally posted by GEORGE ANDERSON


Mike...the decals would work!
George

Good Point.

I ended up getting a Milodon breather from summit that has a nice flat top. One of those stickers might just do the trick to make it a semi permenant solution.

Also got some Moroso Grommits with baffling which I hope keeps it from sucking all the oil through the PCV.