Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   Puke tank hose routing (http://www.clubcobra.com/forums/fe-talk/69024-puke-tank-hose-routing.html)

JGC 04-26-2006 07:14 PM

Puke tank hose routing
 
Hello,

I just received my puke tank for my new Cobra build up and where should the hoses route to and from the tank?

Thanks,

Jack

luke-44 04-26-2006 09:30 PM

my car doesn't have a puke tank -unlesss you mean an expansion tank - Suggest you check out a few of the pix on this site - get into the photo galleries - someone will show it.

Good luck...oh...and welcome to the madness..:)

CSX 4027 04-26-2006 09:38 PM

tank
 
Pass side upper is a raod draft that snakes down the trans tunnel> Originally went to ground but, you should mount a catch can.
Pass side lower comes from/goes to oil pan.
Inboard side upper goes to rear manifold breather
Inboard side lower to top of tranny
All from memory but the inboards could be reversed. I forget around this time of night

JGC 04-27-2006 06:28 AM

Thank you very much.


Jack

Roger Bolick 04-27-2006 09:46 AM

What is the actual position of the 3 screws holding this to the firewall???

I have seen the overflow with a rubber cap at times. I'll try to post a picture.

HOW DO I CHOP THIS DOWN TO SIZE, my puke tank is too big!! 79k vs 39k JPEG limit.. sorry.

computerworks 04-27-2006 10:11 AM

2 Attachment(s)
Here are 2 pictures of the tank on Steve's car....

priobe 04-27-2006 12:30 PM

Is it possible to shorten the breather for the rear breather or add a filter to the rear, so that you do not have to use a puke tank?


All times are GMT -7. The time now is 04:37 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: