|
Anyone have flow numbers for KCR Stage 1 Edelbrock heads?
Are they around 270/200?
|
Brent, you might just send an email to KC or call him. I'm sure he'll be able to give you the numbers.
|
Stage 1
-----Original Message-----
From: shellyc@iocc.com [shellyc@iocc.com] Sent: Thursday, September 28, 2006 10:47 PM To: Keith Craft, Inc. Subject: [SPAM]Re: FW: Stage 1 Heads The 427 style heads with the 2.19/1.73 valves in the stage one form will flow about 280/220 and make up to 550HP depending on the camshaft and cubic inches. This is with about a 10.5 to 1 compression. Thanks, Keith |
Keith,
How about the stage 1's with the 2.09/1.66 CJ valves like Brent and I both have from you? Thanks, Byron W. |
Byron, I think that was an email from Keith to someone else.....I believe Keith's name on here is Keithc8
|
Yea, I think you are right. I saw Shelly and just answered. I will go back to sleep now.
Later, Byron W. |
Byron,
Sorry to confuse you. I had asked Keith for the flow numbers for my heads a few weeks ago. I recall seeing a before and after chart for stock Edelbrocks with 2.09 valves flowing 250/190. I am sure Keith's valve job gets that to around 270/200 and my bigger valves make it 280/220. |
Snakepilot,
As you can tell at my age it does not take a lot sometimes. What heads and valves are you using? Also, will the 2.15 intake valves clear a 4.110 bore if used in the edelbrock heads? I have a pretty stout +060 390 going together for my Shell Valley car. Thanks again, Byron |
I have Keith Craft Stage 1 427 Edelbrock heads. I have a 4.25 bore so I went with the 2.19/1.73 valves. If I had to run smaller valves, I might have opted for more porting. I don't know about your bore size, I went with KC's recommendation. He is tough to get a hold of on the phone, but will talk as long as you want once you have him on the line.
|
| All times are GMT -7. The time now is 02:17 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: