Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   1968 Side oiler converting to Hydraulic lifters (http://www.clubcobra.com/forums/fe-talk/92972-1968-side-oiler-converting-hydraulic-lifters.html)

smokeonthewater 09-30-2009 12:11 PM
All's well that ends well
 
Just wanted to put the cherry on top of this post. Thanks everyone for the help with this problem. It saved me a ton of time and trouble. I wanted to wait until I had some time on the rebuild before I claimed victory. After a Summer of use, I'm happy to report that things seem to be in good running order. I appreciate everyone taking the time to help a fellow FE fanatic even if I've never even ridden in a Cobra. (Not that I couldn't appreciate it)

Thanks,
Eric

lovehamr 10-01-2009 01:41 PM
Quote:
Originally Posted by smokeonthewater (Post 898867)
I think I'll make the other cam into a lamp fixture.
Eric
I think I'd use it as an inter-rectal machinist correction device.:rolleyes:

Steve

smokeonthewater 10-01-2009 03:21 PM
Quote:
Originally Posted by lovehamr (Post 988913)
I think I'd use it as an inter-rectal machinist correction device.:rolleyes:

Steve
Yeah a High Lift Long Duration application.
Ya know - he would never even admit that he screwed up.

Eric

Mike Bartlett 10-01-2009 03:59 PM
How about a picture and a little detail of the boat? Two 427's sounds cool!

Mike

smokeonthewater 10-01-2009 10:30 PM
Quote:
Originally Posted by Mike Bartlett (Post 988992)
How about a picture and a little detail of the boat? Two 427's sounds cool!

Mike
I don't have anything as well done or interesting as this blog from an owner with a bit more of the hot rod stuff in his blood. It's interesting to note that he is willing to put up with a bit more of a "high strung" build. Also interesting that he also ended up with a side oiler.
Eric

http://paramount-restoration.blogspo...nity-ward.html


All times are GMT -7. The time now is 06:25 AM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: